How to sew mitered corners : 4 ways – all easy !

Learn all about sewing corners perfectly with bias tape borders or a simple turned under mitered corner. Useful in finishing corners of quilts, blankets etc

What is a mitered corner? Why do you need one?

A mitered corner is a neat way of finishing the corner of a fabric edge in such a way that there is no bulk in the corners when the fabric is turned under to finish the edges.

The easiest way to finish a corner is to turn under the edges as is but the corners prove bulky with the four layers of fabric. It sure looks ugly. But with the mitered corner technique you have a border or a hem which looks neat on the front as well as the back.There is an attractive 45-degree seam along the corner.

You can easily hand sew a mitered corner or stitch it with your sewing machine. But I would prefer hand sewing for the corner stitches, for more precision. Another good practice is to prewash the fabric before sewing. This will prevent your mitered corner skewing after a wash

How to sew Mitered corners

Method one – self-turned mitered corner

In this method the fabric edges are turned to the back of the fabric ( or the front for a border like effect). This is the most preferred method of finishing the edges of napkins, blankets, bedspreads etc. The hem looks wonderful with no bulk on the corners.  

How to sew this mitered corner

Cut the fabric edges really straight. In case of blankets napkins etc you have to ensure that all the four sides are cut really straight. In case of cotton fabrics you can rip and you will get a very straight edge. You can use the transparent  square scale to get straight edge, as well.

how to make mitered corners on napkins

Turn the edges 1/2 inch to the back of the fabric. Press in place.

how to sew mitered corner

Turn the fabric edges again the width of the first turn ( 1/2 inch, it was). Now you have made two folds for each edges. Finger press the edge fold.Mark the inside edge of this second fold with a chalk.

mitered corner sewing

Open up one fold ( the second one).

( Do not mark as drastically as I have done with red ink. You just need an indention to know the meeting point ( the black dot ) in the picture.)

Now bring the corner to meet the black you have made earlier

mitered corner sewing diy

Crease nicely. Mark with a chalk on that line – you need to see the line; you will be stitching through it later.

Fold the fabric so that the corner is pointed and the line you had made earlier is on either side. Stitch through the line you have marked ( red line in the picture below). Start and end the stitch with back stitching.

Cut the extra seam allowance; press the seam open.

sewing mitered corners

Now turn the edge inside out so that it looks like the picture below. You can top stitch this mitered fold in place along the edge.

 

Method 2 – Mitered corner with a fold

You can achieve a similar mitered look without cutting anything.You should first finish the edges of the fabric with a zig zag finish or rolled hem finish. Mark a line 1/2 inch to the inside from the edges. Then turn the corner to the inside along the corner mark.Now fold the other folded edges to the inside . You will get a mitered corner. Stitch the folded fabric in place. 

handkerchief

Method 3 – Mitered corner with bias tape

There are two ways to do it.

Method 1.

how to make a mitered corner with bias tape

You can see this method in action in the post on sewing a pieced blanket.

sew quilt blanket

Method 2 This involves some finger tricks and easy stitching.

First and foremost you need to fold the fabric strip in a double fold – this means first the side edges are turned to the inside 1/4 inches

Then the fabric strip is folded by the middle so that one side is a little (1/8 inch or so) wider.

This projecting will ensure that the binding is done accurately and stitching catches the fabric underneath.

Stitch the binding in place till the very corner.

how to sew a baby blanket

When you reach the corner fold the binding strip as in the picture

baby blanket sewing tutorial

On the inside, the fabric edge should touch the centerfold of the fabric strip. Arrange it so, if the alignment is not correct.

Fold the fabric binding strip so that a mitered corner is formed.

baby blanket

Stitch this corner in place.

Check out the post on making bias tape and binding with bias tape for more details on this

Method 4 – Mitered corner with a Border

This method is used when you need to make a border for the fabric with a different coloured / patterned fabric than the main fabric, like for a shawl. With this method you will still need to finish the raw fabric edges after the border with the mitered corners are stitched.

For this method you need 2 strips of fabric ( for one corner) 1 inch wide and length 2 inch more than the fabric edge of each side.

how to sew mitered corners

Keep the fabric strip mid point aligned with the fabric edge midpoint

Stitch the edges together. One important thing here is that you have to leave 1/4 inch unstitched on either side of the fabric edge.

how to sew mitered corners

Now turn one short edge down as in the picture below

Keep the other fabric strip on the adjascent fabric edge. Stitch the same way, along the edge, leaving 1/4 inch on either sides unstitched.You will find that you have a snug corner there already. Now on to get the mitered corner for your border strips.

Fold the fabric diagonally. Keep the fold along a scale; you will see that the scale is overlapping the fabric strips. Mark where the scale touches the fabric strip ( red mark in the picture below)

mitered corner sewing tutorial

Stitch along that mark. Remember not to stitch the main fabric ; You will find that you are starting to stitch from the last stitch on the fabric strip, along the line you have marked. 

how to sew a mitered corner

Cut off the excess seam allowance. You will have a beautiful border with a mitered corner as in the below picture. 

mitered corner stitching

The disadvantage of this method is that you will need to face/line this border or the whole fabric, as the back will have exposed seams of the corner stitching. 

Another method exists which finishes the edge and adds a border with another fabric at the same time quite beautifully. Though it is not a mitered corner, the corner is stitched quite neatly with  border

sewing a scarf

Check out the detailed tutorial on “How to make a scarf” for this method

diy scarf tutorials

Photo of author
Hi, I love sewing, fabric, fashion, embroidery, doing easy DIY projects and then writing about them. Hope you have fun learning from sewguide as much as I do. If you find any mistakes here, please point it out in the comments.

10 thoughts on “How to sew mitered corners : 4 ways – all easy !”

  1. Hi Sarina,

    Thank you for this detailed tutorial. Your photographs make everything very clear. I prefer a tutorial of this type over a video so I will definitely be back the next time I need sewing expertise.

    Megan

    Reply
  2. I have a purchased flat pictured piece of fabric with white edges that I am turning and hemming. It is in the 4 corners that I need to know how to miter them.

    Reply
Your opinion is important. Leave a comment